![]() ![]() NOTE: If the camera remains connected to the network and the local instance of Alert Commander is restarted, the camera will be re-registered with the original user's information. The camera is now restored to factory settings, and should be disconnected from the Ethernet cable. NOTE: If the LED light on the camera doesn't remain solid light blue, repeat steps 1-3. See answer 360023408593 for details on what each color represents. The status LED indicator on the camera will go through a sequence of colors and should settle on solid light blue. Gently press the reset button, hold for 10 seconds, and then release.Īfter releasing the button, the camera will perform the reset procedure. Insert a paper clip or a similar object into the reset hole (Figure 2). Unscrew and separate the hatch from the back of the camera (Figure 1). IMPORTANT: Close the Alert Commander software at this point to make sure the camera doesn't reapply the original user's web credentials.ĭismount the camera and perform a push pin reset: On the right, locate "Show LED for" and select Status. Make sure the camera LED status indicators are enabled:Įxpand the Cameras drop-down menu on the left and select the camera to be reset. When the format process completes, click OK. On the right, locate the camera you want to reset and select the Format option. NOTE: Make sure other computers on the same network aren't running the Alert Commander software.Įxpand the Storage drop-down menu and select Cameras. Launch Alert Commander and click the settings button (gear icon). Move the Motion Sensitivity slider to "0" (far left). Web Commander is always on and working behind the scenes, even when youre not logged in, to keep you informed and in control. You have the power to view live and recorded video and change settings, alerts, and camera options. On the right, locate and expand Advanced. With Logitech Alert Web Commander, youre in control of your Logitech Alert master system no matter where you happen to be. Create and manage e-mail and mobile phone motion. Set up motion zones for individual cameras. View live and recorded video in HD resolution. To reset your Alert camera to factory defaults:Įxpand the Motion drop-down menu on the left and select the camera you want to disable. Here’s what else you can do: Install your Logitech Alert camera system on any Mac (with OS version 10.6.8 or higher) Control and configure your video security system. In some situations, you should reset the Alert camera to its factory default settings, such as if you're planning to return or release ownership of your camera. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |